Skip to content

text model · dots.llm · iOS

Can I run dots.llm1 on iPad Pro M4 (16GB, 1TB/2TB config)?

Compatibility verdict VRAM threshold engine
No, not enough memory would not load

No. dots.llm1 needs ~98.1 GB even at Q4_K_M, but iPad Pro M4 (16GB, 1TB/2TB config) only has ~12 GB usable.

Needs ~98.1 GB Device usable ~12 GB

Needs ~98.1 GB even at Q4_K_M, but only ~12 GB is usable.

That figure is at a 4k context and moves about ±15% as context length changes.

The gap is about 86.1 GB: dots.llm1 needs roughly 98.1 GB at Q4_K_M and iPad Pro M4 (16GB, 1TB/2TB config) leaves only about 12 GB usable for a model. The lightest tracked hardware that runs dots.llm1 is the Apple M3 Ultra (256GB) at 256 GB. See dots.llm1 on Apple M3 Ultra (256GB).

Q4_K_M needed
~98.1 GB
Usable on device
~12 GB
Device memory
16 GB
Share on X Share on Reddit

Which quant fits

Quant ladder vs ~12 GB usable
Q2_K
~63.2 GB
Q3_K_M
~73.1 GB
Q4_K_M
~98.1 GB
Q5_K_M
~104.9 GB
Q6_K
~120.1 GB
Q8_0
~155.6 GB
FP16
~289.7 GB
The line marks iPad Pro M4 (16GB, 1TB/2TB config)'s ~12 GB budget; rungs past it are too large.

How to run it

On iOS use Apple Foundation Models (Built into iOS 26, ~3B on-device model, zero download, fully private.).

Model dots.llm
Parameters
142B (MoE, 14B active)
Q4_K_M size
94.4 GB
Q8_0 size
151.9 GB
Context
32k
Full dots.llm1 requirements →
Device iOS
Memory
16 GB unified
Usable for weights
~12 GB
Power draw
~14 W
Best runtime
MLX (via Python or Swift; mlx-lm package)
Best models for iPad Pro M4 (16GB, 1TB/2TB config) →

What you can run instead

Run dots.llm1 on other hardware

FAQ

Can iPad Pro M4 (16GB, 1TB/2TB config) run dots.llm1?

No. dots.llm1 needs ~98.1 GB even at Q4_K_M, but iPad Pro M4 (16GB, 1TB/2TB config) only has ~12 GB usable.

How much memory does dots.llm1 need?

iPad Pro M4 (16GB, 1TB/2TB config) does not have enough memory. At Q4_K_M the weights are ~94.4 GB; with KV cache and runtime overhead, budget ~98.1 GB at a 4k context. It is a Mixture-of-Experts model (142B total / 14B active), so all experts must stay in memory; memory tracks total params, not active params.

What is the best tool to run dots.llm1 on iOS?

On iPhone and iPad, Apple Foundation Models (Built into iOS 26, ~3B on-device model, zero download, fully private.) is the standard choice. Phones realistically run 1B-4B class models. Anything larger thermally throttles or OOMs.

Embed this

dots.llm1 on iPad Pro M4 (16GB, 1TB/2TB config) compatibility badge A live badge for your model card or README, updated as the data is.
Markdown
$ [![dots.llm1 on iPad Pro M4 (16GB, 1TB/2TB config)](https://localmodel.run/badge/dots-llm1/ipad-pro-m4-16gb.svg)](https://localmodel.run/can-i-run/dots-llm1/ipad-pro-m4-16gb)

Sources

Weights are measured from GGUF files; KV cache and overhead are computed, so totals can vary ~15% with context and runtime. Any tok/s is a bandwidth estimate. See methodology.